HP P2000 Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 217
show ntp-status
Description Shows the status of the use of Network Time Protocol (NTP) in the system.
Syntax
show ntp-status
Output NTP Status
• activated: NTP is enabled
• deactivated: NTP is disabled
NTP Server Address
NTP server IP address, or 0.0.0.0 if not set
Last Server Contact
Date and time, in the format year-month-day hour:minutes:seconds (UTC), of the last
message received from the NTP server; or none
Example Show NTP status for the system:
# show ntp-status
NTP Status
----------
NTP Status: activated
NTP Server Address: 69.10.36.3
Last Server Contact: 2009-12-04 16:24:42
Basetypes • ntp-status
• status
See also • set controller-date

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure