HP P2000 Reference Guide

224 Alphabetical list of commands
show refresh-counters
Description In XML API format, shows when the data represented by the base type was last updated.
The value 0 means the data has never been updated and is not cached. A value other than 0 is a
timestamp indicating that the data has been updated. If the value has changed since the last time
you called this command then the data has changed.
Syntax
show refresh-counters
Basetypes • refresh-counters
• status
See also • set cli-parameters

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure