HP P2000 Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 71
delete chap-records
Description For iSCSI, deletes a specified CHAP record or all CHAP records. This command is permitted whether
or not CHAP is enabled.
Syntax To delete the CHAP record for a specific originator:
delete chap-records name originator-name
To delete all CHAP records:
delete chap-records all
Parameters name originator-name
The originator name, typically in IQN format.
all
Delete all CHAP records in the database.
Example Delete the CHAP record for a specific originator:
# delete chap-records name iqn.1991-05.com.microsoft:myhost.domain
Success: Command completed successfully. (iqn.1991-05.com.microsoft:myhost
.domain) - The CHAP record was deleted.
Delete all CHAP records, of which two exist:
# delete chap-records all
Info: Removed CHAP record 0.
Info: Removed CHAP record 1.
Success: Command completed successfully. - All CHAP records were deleted.
See also • create chap-record
• set chap-record
• show chap-records
• show host-parameters

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure