HP P2000

HP P2000 G3 MSA System CLI Reference Guide 113
reset volume-statistics
Description Resets performance statistics for all or specified volumes.
Syntax
reset volume-statistics [volumes]
Parameters volumes
Optional. Names or serial numbers of the volumes to reset statistics for. For volume syntax, see
Command syntax on page 21. If this parameter is omitted, statistics are reset for all volumes.
Example Reset statistics for volume vd1_v001:
# reset volume-statistics vd1_v001
Success: Command completed successfully.
See also • reset all-statistics
• reset controller-statistics
• reset disk-error-statistics
• reset disk-statistics
• reset host-port-statistics
• reset vdisk-statistics
• show volume-statistics
• show volumes