424 XML API basetype properties
volume-copy-status
Properties
Example
# show volumecopy-status
...
<OBJECT basetype="volume-copy-status" name="volume" oid="1" format="rows">
<PROPERTY name="vc_volume_name" type="string">vd01_v001_c001</PROPERTY>
<PROPERTY name="serial-number" key="true" type="string">SN</PROPERTY>
<PROPERTY name="virtual-disk-name" type="string">RAID1</PROPERTY>
<PROPERTY name="source-volume" type="string">vd01_v001</PROPERTY>
<PROPERTY name="progress" type="string">5%</PROPERTY>
<PROPERTY name="status" type="string">Unavailable</PROPERTY>
<PROPERTY name="status-reason" type="string">VC In Progress</PROPERTY>
</OBJECT>
...
Table 84 volume-copy-status properties
Name Type Description
vc_volume_name string Destination volume name.
serial-number string Destination volume serial number.
virtual-disk-
name
string Destination vdisk name.
source-volume string Source volume name.
progress string Percent complete of the volume copy (0%–99%).
status string • Unavailable: A volume copy is in progress to the destination volume.
• Suspended: The source volume went offline while a volume copy was in
progress. When the source volume comes back online, the copy process
resumes from the point where it stopped.
status-reason string More information about the status value.
To Next Page
Loading...
Need help?
General
