126 Alphabetical list of commands
set chap-record
Description For iSCSI, changes an originator’s CHAP record. You can change the record’s secret, mutual name,
and mutual secret values. This command is permitted whether or not CHAP is enabled.
Syntax
set chap-record
name originator-name
[secret originator-secret]
[mutual-name recipient-name mutual-secret recipient-secret]
Parameters name originator-name
The originator name, typically in IQN format.
secret originator-secret
The secret that the recipient uses to authenticate the originator. The secret is case sensitive and can
include 12–16 bytes.
mutual-name recipient-name
Optional; for mutual CHAP only. The recipient name, typically in IQN format. The name can have a
maximum of 223 bytes, including 0–9, lowercase a–z, hyphen, colon, and period. To determine a
storage system’s IQN, use the show ports command to view an iSCSI port Target ID value. This
parameter and mutual-secret must be set together.
mutual-secret recipient-secret
Optional; for mutual CHAP only. The secret that the originator uses to authenticate the recipient. The
secret is case sensitive, can include 12–16 bytes, and must differ from the originator secret. A storage
system’s secret is shared by both controllers. This parameter and mutual-name must be set
together.
Example For mutual CHAP, add a recipient name and secret to a CHAP record:
# set chap-record name iqn.1991-05.com.microsoft:myhost.domain mutual-name
iqn.1995-03.com.acme:01.storage.00c0ffd6000a mutual-secret ABCdef123456
Success: Command completed successfully. - The CHAP record was changed.
See also • create chap-record
• delete chap-records
• show chap-records
• show host-parameters
• show iscsi-parameters
To Next Page
Loading...
