HP P2000

222 Alphabetical list of commands
show protocols
Description Shows which management services and protocols are enabled or disabled.
Syntax
show protocols
Example Show the status of service and security protocols:
# show protocols
Service and Security Protocols
------------------------------
Web Browser Interface (HTTP): Enabled
Secure Web Browser Interface (HTTPS): Enabled
Command Line Interface (Telnet): Enabled
Secure Command Line Interface (SSH): Enabled
Storage Management Initiative Specification (SMI-S): Enabled
File Transfer Protocol (FTP): Disabled
Simple Network Management Protocol (SNMP): Enabled
Service Debug (Debug): Disabled
In-band SES Management (SES): Enabled
Basetypes • security-communications-protocols
• status
See also • set protocols