To Next Page

To Previous Page

HP P2000 G3 MSA System CLI Reference Guide 69

delete all-master-volumes

Description Deletes all master volumes associated with a specified snap pool. The volumes' schedules are also

deleted.

NOTE: You must delete all snapshots that exist for the master volumes before you can delete the

master volumes.

Syntax

delete all-master-volumes snap-pool volume

Parameters snap-pool volume

Name or serial number of the snap pool whose master volumes should be deleted. For volume

syntax, see Command syntax on page 21.

Example Delete all master volumes associated with snap pool SP1:

# delete all-master-volumes snap-pool SP1

Success: Command completed successfully. (SP1) - All master volumes were

deleted.

Other manuals for HP P2000

Questions and Answers:

Need help?

Do you have a question about the HP P2000 and is the answer not in the manual?

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure