HP P2000 Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 11
About this guide
This guide provides information about managing an HP P2000 G3 MSA System by using its command-line
interface (CLI).
Intended audience
This guide is intended for storage system administrators.
Prerequisites
Prerequisites for using this product include knowledge of:
• Network administration
• Storage system configuration
• Storage area network (SAN) management and direct attach storage (DAS)
• Fibre Channel, Serial Attached SCSI (SAS), Internet SCSI (iSCSI), and Ethernet protocols
Related documentation
In addition to this guide, please refer to online help and the following documents for this product:
• HP MSA System Racking Instructions
• HP P2000 G3 MSA System Installation Instructions
• HP P2000 G3 MSA System Cable Configuration Guide
• HP P2000 G3 MSA System FC User Guide
• HP P2000 G3 MSA System FC/iSCSI User Guide
• HP P2000 G3 MSA System SAS User Guide
• HP P2000 G3 iSCSI MSA System iSCSI User Guide
• HP P2000 G3 MSA System SMU Reference Guide
• HP P2000 G3 MSA System Event Descriptions Reference Guide
You can find these documents from the Manuals page of the HP Business Support Center web site:
http://www.hp.com/support/manuals
.

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure