HP P2000 Reference Guide

210 Alphabetical list of commands
show job-parameters
Description Shows parameters for background vdisk scrub, partner firmware upgrade, and other jobs.
Syntax
show job-parameters
Output Vdisk Background Scrub
Shows whether disks in vdisks are automatically checked for disk defects to ensure system health.
Partner Firmware Upgrade
Shows whether component firmware versions are monitored and will be automatically upgraded on
the partner controller.
Utility Priority
Priority at which jobs (such as vdisk verification and reconstruction but not background scrub) run
with respect to I/O operations competing for the system’s processors: High, Medium, or Low.
Example Show a system’s job parameters:
# show job-parameters
Job Parameters
--------------
Vdisk Background Scrub: Disabled
Partner Firmware Upgrade: Enabled
Utility Priority: High
Basetypes • job-parameters
• status
See also • set job-parameters

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure