HP P2000 Reference Guide

376 XML API basetype properties
replication-image-params
Properties
Example
# show replication-images
...
<OBJECT basetype="replication-image-params" name="replication-image-params" oid="5"
format="rows">
<PROPERTY name="status" type="string">Complete</PROPERTY>
<PROPERTY name="status-numeric" type="string">5</PROPERTY>
Table 56 replication-image-params properties
Name Type Description
status string Replication image status.
• N/A: The image information is not valid.
• Queued: The image is known to exist in the primary-view volume but
replication has not started.
• Replicating: The image is being replicated.
• Suspended: The image is being replicated but replication is suspended.
• Complete: The image is created, fully replicated, and available.
• Create-Snapshot: The image is fully replicated but a snapshot of the
image is being created.
• Offline: The image has been replicated but is unusable due to an error.
status-numeric string Numeric equivalents for status values.
• 0: N/A
• 1: Queued
• 2: Replicating
• 3: Suspended
• 4: Create-Snapshot
• 5: Complete
• 6: Offline
progress string Progress in percent if the image is being replicated. Applies only to secondary
volumes.
start-time string Date and time, in the format year-month-day hour:minutes:seconds
(UTC), when the replication operation started.
start-time-
numeric
string Unformatted start-time value.
update-time string Date and time, in the format year-month-day hour:minutes:seconds
(UTC), when the replication operation status was last updated.
update-time-
numeric
string Unformatted update-time value.
suspended-time string Date and time, in the format year-month-day hour:minutes:seconds
(UTC), when the replication operation was suspended.
suspended-time-
numeric
string Unformatted suspended-time value.
est-completion-
time
string Date and time, in the format year-month-day hour:minutes:seconds
(UTC), when the replication operation is estimated to complete.
est-completion-
time-numeric
string Unformatted est-completion-time value.
time string Total elapsed time, in the format hour:minutes:seconds (UTC), for the
replication operation.

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure