HP P2000 Reference Guide

236 Alphabetical list of commands
show schedule-details
Description Shows information about a specified task schedule.
Syntax
show schedule-details schedule
Parameters schedule
Schedule name.
Example Show information about task schedule SnapSched:
# show schedule-details SnapSched
Schedule Details
----------------
Schedule Name: SnapSched
Schedule Specification: Start 2009-02-19 23:47:00, Every 3 Minutes
Status: Ready
Next Time: 2009-02-23 12:59:00
Task To Run: Snap
Error Message:
Tasks
-----
Task Name: Snap
Task Type: TakeSnapshot
Status: Ready
Task State: Start
Error Message:
Task Details
------------
Source Volume: VD1_V1
Source Volume Serial: SN
Prefix: VD1_V1
Count: 4
Last Created: VD1_V1_S0001
Snapshot Name Snapshot Serial
------------------------------------------------------
VD1_V1_S0001 SN
Basetypes • schedules
• status
See also • create schedule
• delete schedule
• show schedules

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure