402 XML API basetype properties
snmp-parameters
Properties
Example
# show snmp-parameters
...
<OBJECT basetype="snmp-parameters" name="snmp-parameters" oid="1">
<PROPERTY name="snmp-enabled" type="string">Disabled</PROPERTY>
<PROPERTY name="snmp-enabled-numeric" type="string">0</PROPERTY>
<PROPERTY name="snmp-filter" type="string">none</PROPERTY>
<PROPERTY name="snmp-filter-numeric" type="string">0</PROPERTY>
<PROPERTY name="snmp-trap-host-1" type="string">0.0.0.0</PROPERTY>
<PROPERTY name="snmp-trap-host-2" type="string">0.0.0.0</PROPERTY>
<PROPERTY name="snmp-trap-host-3" type="string">0.0.0.0</PROPERTY>
<PROPERTY name="snmp-read-community" type="string">public</PROPERTY>
<PROPERTY name="snmp-write-community" type="string">private</PROPERTY>
</OBJECT>
...
Table 72 snmp-parameters properties
Name Type Description
snmp-enabled string Shows whether the Simple Network Management Protocol (SNMP) interface is
enabled or disabled.
• Disabled: SNMP is disabled. This is the default.
• Enabled: SNMP is enabled.
snmp-enabled-
numeric
string Numeric equivalents for snmp-enabled values.
• 0: Disabled
• 1: Enabled
snmp-filter string Minimum level of events to include for SNMP traps.
• crit: Only critical events are sent as traps.
• error: Error and critical events are sent as traps.
• warn: Warning, error, and critical events are sent as traps.
• info: All events are sent as traps.
• none: No events are sent as traps and traps are disabled. This is the default.
snmp-filter-
numeric
string Numeric equivalents for snmp-filter values.
• 0: none
• 1: info
• 2: error
• 4: warn
• 8: crit
snmp-trap-host-
1
string Trap host IP address.
snmp-trap-host-
2
string Trap host IP address.
snmp-trap-host-
3
string Trap host IP address.
snmp-read-
community
string Community string for SNMP read-only access (not shown to Monitor users). The
default is public.
snmp-write-
community
string Community string for SNMP write access (not shown to Monitor users). The
default is private.
To Next Page
Loading...
Need help?
General
