HP P2000

HP P2000 G3 MSA System CLI Reference Guide 313
debug-log-parameters
Properties
Table 20 debug-log-parameters properties
Name Type Description
host string Shows whether host interface debug messages are enabled for inclusion in the
Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
host-numeric string Numeric equivalents for host values.
• 0: Off
• 1: On
disk string Shows whether disk interface debug messages are enabled for inclusion in the
Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
disk-numeric string Numeric equivalents for disk values.
• 0: Off
• 1: On
mem string Shows whether internal memory debug messages are enabled for inclusion in
the Storage Controller debug log.
• Off: Disabled. This is the default.
• On: Enabled.
mem-numeric string Numeric equivalents for mem values.
• 0: Off
• 1: On
fo string Shows whether failover and recovery debug messages are enabled for inclusion
in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
fo-numeric string Numeric equivalents for fo values.
• 0: Off
• 1: On
msg string Shows whether inter-controller debug messages are enabled for inclusion in the
Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
msg-numeric string Numeric equivalents for msg values.
• 0: Off
• 1: On
ioa string Shows whether standard debug messages for an I/O interface driver are
enabled for inclusion in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled. This is the default.
ioa-numeric string Numeric equivalents for ioa values.
• 0: Off
• 1: On