HP P2000 Reference Guide

112 Alphabetical list of commands
reset vdisk-statistics
Description Resets performance statistics for all or specified vdisks.
Syntax
reset vdisk-statistics [vdisks]
Parameters vdisks
Optional. Names or serial numbers of the vdisks to reset statistics for. For vdisk syntax, see
Command syntax on page 21. If this parameter is omitted, statistics are reset for all vdisks.
Example Reset statistics for vdisks VD1 and MyVdisk:
# reset vdisk-statistics VD1,MyVdisk
Success: Command completed successfully.
See also • reset all-statistics
• reset controller-statistics
• reset disk-error-statistics
• reset disk-statistics
• reset host-port-statistics
• reset volume-statistics
• show vdisk-statistics
• show vdisks

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure