152 Alphabetical list of commands
set remote-system
Description Changes remote-system credentials stored on the local system. Do this when the user name or
password to access a remote system has been changed on that system
Syntax
set remote-system
[password password]
[username username]
system
Parameters password password
Optional. New password to access the remote system.
username username
Optional. New user name to access the remote system.
system
Name or network-port IP address of the remote system.
Example Change the password that is stored to access a remote system:
# set remote-system password Abc_123 System2
Info: Command completed successfully. (System2) - Password set
Success: Command completed successfully. (System2) - The remote system was set.
See also • create remote-system
• delete remote-system
• remote
• show remote-systems
To Next Page
Loading...
