HP P2000 Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 163
set system
Description Sets the system’s name, contact person, location, and description. Each value can include a
maximum of 79 bytes, using characters except double quote or backslash. A value that contains a
space must be enclosed in double quotes.
The system name is shown in the browser title bar or tab. The name, location, and contact are
included in event notifications. All four values are included in system debug logs for reference by
service personnel.
Syntax
set system
[name value]
[contact value]
[location value]
[info value]
Parameters name value
A name to identify the system.
contact value
The name of person who administers the system.
location value
The location of the system.
info value
A brief description of what the system is used for or how it’s configured.
Example Set the system name to Test and the contact to J. Doe:
# set system name Test contact "J. Doe"
Success: Command completed successfully
See also • show system

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure