To Next Page

To Previous Page

98 Alphabetical list of commands

ping

Description Tests communication with a remote host. The remote host is specified by IP address. Ping sends ICMP

echo response packets and waits for replies.

Syntax

ping

host-address

[count]

Parameters host-address

The remote host’s IP address in dotted decimal form.

count

Optional. The number of packets to send. The default is 4 packets. Use a small count because the

command cannot be interrupted.

Example Send two packets to the remote computer at 10.134.50.6:

# ping 10.134.50.6 2

Info: Pinging 10.134.50.6 with 2 packets.

Success: Command completed successfully. - The remote computer responded with 2

packets.

Other manuals for HP P2000

Questions and Answers:

Need help?

Do you have a question about the HP P2000 and is the answer not in the manual?

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure