HP P2000 Reference Guide

340 XML API basetype properties
fan
Properties
Table 31 fan properties
Name Type Description
durable-id string Fan unit ID in the form fan_enclosure-ID.fan-number.
name string Fan unit name in the form Fan loc:position-PSU power-supply-ID,
where the position is as viewed from the back of the enclosure.
location string Fan unit location in the form Enclosure enclosure-ID - position,
where the position is as viewed from the back of the enclosure.
health string • OK
• Degraded
• Fault
• N/A
health-numeric string Numeric equivalents for health values.
• 0: OK
• 1: Degraded
• 2: Fault
• 4: N/A
health-reason string More information about the health value.
status string Fan unit status.
• Up
• Warning
• Error
• Not Present
• Unknown
• Disconnected
status-numeric string Numeric equivalents for status values.
• 0: Up
• 1: Warning
• 2: Error
• 3: Not Present
• 4: Unknown
• 6: Disconnected
speed uint32 Fan speed (RPM).
position string Fan unit position, as viewed from the back of the enclosure.
• Left
• Right
• Top
• Bottom
position-
numeric
string Numeric equivalents for position values.
• 0: Left
• 1: Right
•
2: Top
• 3: Bottom
serial-number string Serial number of a fan unit in a D2700 drive enclosure, or N/A.

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure