HP P2000 Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 287
4 XML API basetype properties
Chapter 3 describes command output that is shown in console format. This chapter describes the basetype
properties that CLI commands display in XML API format, and is organized to help you find a basetype by
name. This chapter excludes basetypes that are for internal use only.
Each basetype topic includes the following information:
• For each property, the values of its name and type elements, and a description of the values that the
property may show. For descriptions of other elements see Table 3 on page 18.
• Example output from a command that uses the basetype. Some basetypes are used by multiple
commands.
• References to embedded or nested basetypes that the output may show.

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure