HP P2000 Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 345
host-view
Properties
Example
# show host-maps
...
<OBJECT basetype="host-view" name="host-view" oid="1" format="labeled">
<PROPERTY name="id" key="true" type="string">2ffc00c0dd13a447</PROPERTY>
<PROPERTY name="hba-nickname" type="string">Lab_server</PROPERTY>
<PROPERTY name="host-profile" type="string">Standard</PROPERTY>
...
</OBJECT>
...
Embedded basetypes
• host-view-mappings
Table 35 host-view properties
Name Type Description
id string FC or SAS host port WWN, or iSCSI host initiator node name (typically the
IQN).
hba-nickname string User-defined name of the host port, or blank.
host-profile string • Standard: The host allows LUN 0 to be assigned to a mapping. This is the
default.
• OpenVMS: The host does not allow LUN 0 to be assigned to a mapping.
• HP-UX: The host allows LUN 0 to be assigned to a mapping and uses Flat
Space Addressing.

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure