HP P2000 G3 MSA System CLI Reference Guide 235
show sas-link-health
Description Shows the condition of SAS port connections.
Syntax
show sas-link-health
Output Encl
Enclosure ID
Ctlr
ID of the controller module or expansion module
Name
• Out Port: Egress (expansion) port on controller module or an expansion module. Can be
connected to an ingress port on an expansion module.
• In Port: Ingress port on an expansion module. Can be connected to an egress (expansion)
port on a controller module or an expansion module.
Status
Status of the connection:
• Up
• Disconnected
• Not Present
• Warning
• Error
• Unknown
Health
Relative status of the connection:
• OK
• Degraded
• Fault
• N/A
Example Show the condition of SAS port connections in a two-enclosure system:
# show sas-link-health
Encl Ctlr Name Status Health
---------------------------------------------------------------------
1 A Out Port Up OK
1 B Out Port Up OK
---------------------------------------------------------------------
Encl Ctlr Name Status Health
---------------------------------------------------------------------
2 A In Port Up OK
2 A Out Port Disconnected N/A
2 B In Port Up OK
2 B Out Port Disconnected N/A
---------------------------------------------------------------------
Basetypes • expander-ports
• status
To Next Page
Loading...
Need help?
General
