HP P2000 Reference Guide

234 Alphabetical list of commands
Example Show information about all replication volumes:
# show replication-volumes
Name Serial Number Status Status-Reason Monitor Location
Primary-Volume Primary-Volume-Serial Primary-Volume-Status MaxQueue
MaxRetryTime On Error Link Type On Collision Monitor Interval
Priority Connection Status Connection Time
-----------------------------------------------------------------------------
vd01_v001 SN Online N/A OK Remote
vd01_v001 SN Online 32
1800 Retry iSCSI Oldest 60
Medium Online 2011-01-27 10:04:00
Connected Ports Remote Address
--------------------------------------------------------------
A1 IP=10.134.9.46:3260
IP=10.134.9.47:3260
IP=10.134.9.48:3260
A1 IP=10.134.9.49:3260
rvd01_v001 SN Online N/A OK Local
vd01_v001 SN Online 32
1800 Retry iSCSI Oldest 60
Medium Not Attempted N/A
Connected Ports Remote Address
--------------------------------------------------------------
N/A IP=10.134.9.40:3260
N/A IP=10.134.9.41:3260
N/A IP=10.134.9.42:3260
N/A IP=10.134.9.43:3260
Basetypes • replication-volume
• status
See also • set replication-volume-parameters
• show replication-sets

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure