HP P2000

270 Alphabetical list of commands
show volumes
Description Shows volume information for all or specified vdisks.
Syntax
show volumes
[vdisk vdisks]
[class standard|ptsnap]
[type snap-pool|mastervolume|snapshot|standard|primary-volume
|secondary-volume|replication-volume]
[volumes]
Parameters vdisk vdisks
Optional. Names or serial numbers of the vdisks containing the volumes to show. For vdisk syntax,
see Command syntax on page 21.
class standard|ptsnap
Optional. Specifies the class of volumes to show.
type snap-pool|mastervolume|snapshot|standard|primary-volume
|secondary-volume|replication-volume
Optional. Specifies the type of volumes to show. The replication-volume option shows primary
and secondary volumes.
volumes
Optional. Names or serial numbers of volumes to show information about. For volume syntax, see
Command syntax on page 21.
Output Vdisk
Name of the vdisk
Name
Name of the volume
Size
Volume size
Serial Number
Volume serial number
WR Policy
Cache write policy: write-back or write-through
Cache Opt
Cache optimization mode: standard (random) or super-sequential
Read Ahead Size
• Disabled
• Default
• Maximum
• Specific size
Type
• standard: Standard volume
• standard*: Destination of an in-progress volume copy and cannot be
mounted/presented/mapped until the copy is complete
• snap-pool: Snap-pool volume
• master volume: Master volume
• snapshot: Snapshot volume
• replication source: Source for an in-progress replication to a secondary volume
• unknown: Unknown