HP P2000 G3 MSA System CLI Reference Guide 271
Class
• standard: Standard volume, not enabled for snapshots
• PTSNAP: Snapshot-related volume such as a master volume, snap pool, or snapshot
• Proxy: Destination of an in-progress replication from a remote volume, which when complete
will change to type snapshot
Qualifier
• N/A: Non-replication-specific volume such as a standard volume, master volume, snapshot, or
snap pool
• RSR: Replication-specific volume, such as a primary volume, secondary volume, replication
snapshot, or replication image
Volume Description
• For OpenVMS, a numeric value (set with create volume or set volume) that identifies the volume
to an OpenVMS host.
• For HP-UX, a text value (set in-band by a host application) that identifies the volume.
• Blank if not set.
Example Show volume information for standard volumes only:
# show volumes type standard
Vdisk Name Size Serial Number WR Policy Cache Opt Read Ahead Size
Type Class Qualifier Volume Description
--------------------------------------------------------------------------
VD1 V1 20.0GB SN write-back standard Default
standard standard N/A
--------------------------------------------------------------------------
Show volume information for vdisk VD1 only:
# show volumes vdisk VD1
Vdisk Name Size Serial Number WR Policy Cache Opt Read Ahead Size
Type Class Qualifier Volume Description
--------------------------------------------------------------------------
VD1 V1 35.9GB SN write-back standard Default
standard standard N/A
VD1 V2 35.9GB SN write-back standard Default
master volumePTSNAP RSR
VD1 V3 35.9GB SN write-back standard Default
snap-pool PTSNAP N/A
VD1 V4 35.9GB SN write-back standard Default
snapshot PTSNAP N/A
--------------------------------------------------------------------------
Basetypes • volumes
• status
See also • create volume
• delete volumes
• expand volume
• set volume
• show vdisks
• show volume-maps
To Next Page
Loading...
