HP P2000 Reference Guide

110 Alphabetical list of commands
reset host-port-statistics
Description Resets performance statistics for controller host ports.
Syntax
reset host-port-statistics [ports ports]
Parameters ports ports
Optional. The controller ID and port number of ports to reset statistics for. For port syntax, see
Command syntax on page 21. If this parameter is omitted, statistics are reset for all controller host
ports.
Example Reset statistics for all controller host ports:
# reset host-port-statistics
Success: Command completed successfully.
See also • reset all-statistics
• reset controller-statistics
• reset disk-error-statistics
• reset disk-statistics
• reset vdisk-statistics
• reset volume-statistics
• show host-port-statistics
• show ports

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure