128 Alphabetical list of commands
storage-size-base 2|10
Optional. Alias for base.
storage-size-precision #
Optional. Alias for precision.
storage-size-units auto|MB|GB|TB
Optional. Alias for units.
temperature-scale celsius|c|fahrenheit|f
Optional. Specifies to show temperatures in degrees Fahrenheit or Celsius.
timeout #
Optional. Sets the timeout value in seconds for the login session. Valid values are 120–43200
seconds (2–720 minutes). The default is 1800 seconds (30 minutes).
units auto|MB|GB|TB
Optional. Sets the unit for display of storage-space sizes. auto lets the system determine the proper
unit for a size. Based on the precision setting, if the selected unit is too large to meaningfully
display a size, the system uses a smaller unit for that size. For example, if units is set to TB,
precision is set to 1, and base is set to 10, the size 0.11709 TB is instead shown as 117.1 GB. T h e
default is auto.
Example Set CLI parameters:
# set cli-parameters timeout 600 precision 2 units GB temperature-scale f
Success: Command completed successfully. - The settings were changed
successfully.
For scripting, display XML output in api-embed format and disable paging:
# set cli-parameters api-embed pager off
For scripting, display brief XML output in api-embed format and disable paging:
# set cli-parameters api-embed pager off brief on
Set CLI to show output in console format:
# set cli-parameters console
Success: Command completed successfully. - The settings were changed
successfully.
See also • show cli-parameters
To Next Page
Loading...
Need help?
General
