156 Alphabetical list of commands
remote-address ip=IPs|wwnn=WWNNs|wwpn=WWPNs
Optional. Remote addresses associated with the replication volume. Specifies host ports on the
remote system by IP address, World Wide Node Name, or World Wide Port Name. An IP address
value can include a port number; for example, 10.134.11.10:3260. Multiple values must be
separated by commas and no spaces; for example: ip=10.134.2.1,10.134.2.2.
set replication-set
Optional. Name or serial number of the replication set.
replication-volume
Name or serial number of the replication volume. If the name is not unique within the replication set,
the local volume is assumed. If the name is not unique across replication sets, specify the set
parameter.
Example Set a new remote address and error policy for replication volume MV2 in replication set RS1:
# set replication-volume-parameters link-type FC remote-address 10.1.66.55
on-error suspend set RS1 MV2
Success: Replication Volume Parameters Changed.
See also • show replication-sets
• show replication-volumes
To Next Page
Loading...
Need help?
General
