HP P2000

HP P2000 G3 MSA System CLI Reference Guide 165
Example Change parameters for a TakeSnapshot-type task named Snap:
# set task snapshot-prefix VD1v1 retention-count 2 Snap
Success: Command completed successfully. (Snap) - The task was modified.
Change parameters for a VolumeCopy-type task named Copy:
# set task dest-vdisk VD3 dest-prefix VD1v1 modified-snapshot no Copy
Success: Command completed successfully. (Copy) - The task was modified.
Change parameters for a ReplicateVolume-type task named Replicate:
# set task snapshot-prefix VD1v2 replication-mode last-snapshot Replicate
Success: Command completed successfully. (Replicate) - The task was modified.
See also • create task
• delete task
• set schedule
• show schedule-details
• show schedules
• show task-details
• show tasks