HP P2000

230 Alphabetical list of commands
Example Show information about all replication sets:
# show replication-sets
Replication Set [Name (rsvd01_v001) Serial Number (SN) ] Primary Volume:
Name Serial Number Status Status-Reason Monitor Location
Primary-Volume Primary-Volume-Serial Primary-Volume-Status MaxQueue
MaxRetryTime On Error Link Type On Collision Monitor Interval
Priority Connection Status Connection Time
-----------------------------------------------------------------------------
vd01_v001 SN Online N/A OK Remote
vd01_v001 SN Online 32
1800 Retry iSCSI Oldest 60
Medium Online 2011-01-27 10:04:00
Connected Ports Remote Address
--------------------------------------------------------------
A1 IP=10.134.9.46:3260
IP=10.134.9.47:3260
IP=10.134.9.48:3260
A1 IP=10.134.9.49:3260
rvd01_v001 SN Online N/A OK Local
vd01_v001 SN Online 32
1800 Retry iSCSI Oldest 60
Medium Not Attempted N/A
Connected Ports Remote Address
--------------------------------------------------------------
N/A IP=10.134.9.40:3260
N/A IP=10.134.9.41:3260
N/A IP=10.134.9.42:3260
N/A IP=10.134.9.43:3260