HP P2000 Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 251
Task State
Current step of the task:
• Start
• VerifyVolume
• CreateName
• ObtainMap
• UnmapVolume
• CreateVolume
• RemapVolume
• VerifyCreatedVolume
Error Message
Message if an error occurred while processing the task, or blank
Source Volume
Name of the volume to be copied
Source Volume Serial
Serial number of the volume to be copied
Destination Vdisk
Name of the destination vdisk
Destination Vdisk Serial
Serial number of the destination vdisk
Prefix
Label that identifies copies created by this task. Volume names have the format prefix_c#, where
# starts at 001.
Modified Data
• modified: The copy includes modified snapshot data.
• preserved: The copy excludes modified snapshot data.
Last Created
Name of the last volume created by the task, or blank
For a ReplicateVolume task:
Task Name
Task name
Task Type
ReplicateVolume
Status
• Uninitialized: Task is not yet ready to run
• Ready: Task is ready to run
• Active: Task is running
• Error: Task has an error
• Invalid: Task is invalid

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure