HP P2000

HP P2000 G3 MSA System CLI Reference Guide 263
Jobs
Shows whether a job is running and its percent complete.
• DRSC: Disks in the vdisk are being scrubbed
• EXPD: Vdisk is being expanded
• INIT: Vdisk is initializing
• RCON: Vdisk is being reconstructed
• VRFY: Vdisk is being verified
• VRSC: Vdisk is being scrubbed
• Blank if no job is running
Job%
• 0%-99%: Percent complete of running job
• Blank if no job is running (job has completed)
Serial Number
Vdisk serial number
Drive Spin Down
Shows whether drive spin-down is enabled for the vdisk
Spin Down Delay
Shows the number of minutes after which the vdisk and its dedicated spares automatically spin down
Example Show information about all vdisks:
# show vdisks
Name Size Free Own Pref RAID Disks Spr Chk Status Jobs
Job% Serial Number Drive Spin Down Spin Down Delay
-------------------------------------------------------------------------
VD1 587.1GB 116.7GB B B RAID50 6 0 64k FTOL VRSC
41% SN Disabled 0
VD2 146.5GB 95.7GB A A RAID0 2 0 64k UP
SN Enabled - all spinning 1
VD3 900.1GB 900.1GB B B RAID1 2 0 N/A OFFL INIT
0% SN Disabled
-------------------------------------------------------------------------
Basetypes • virtual-disks
• status
See also • create vdisk
• delete vdisks
• expand vdisk
• set vdisk