HP P2000

302 XML API basetype properties
Example
# show cli-parameters
...
<OBJECT basetype="cli-parameters" name="cli-parameters" oid="1" format="pairs">
<PROPERTY name="timeout" type="uint32">1800</PROPERTY>
<PROPERTY name="output-format" type="string">api-embed</PROPERTY>
<PROPERTY name="output-format-api" type="string">api-embed-brief</PROPERTY>
<PROPERTY name="output-format-api-numeric" type="string">5</PROPERTY>
<PROPERTY name="brief-mode" type="string">Enabled</PROPERTY>
<PROPERTY name="brief-mode-numeric" type="string">1</PROPERTY>
<PROPERTY name="base" type="uint8">10</PROPERTY>
<PROPERTY name="pager" type="string">Enabled</PROPERTY>
<PROPERTY name="pager-numeric" type="string">1</PROPERTY>
<PROPERTY name="locale" type="string">English</PROPERTY>
<PROPERTY name="locale-numeric" type="string">0</PROPERTY>
<PROPERTY name="storage-size-base" type="uint8">10</PROPERTY>
<PROPERTY name="storage-size-precision" type="uint8">1</PROPERTY>
<PROPERTY name="storage-size-units" type="string">Auto</PROPERTY>
<PROPERTY name="storage-size-units-numeric" type="string">0</PROPERTY>
<PROPERTY name="temperature-scale" type="string">Celsius</PROPERTY>
<PROPERTY name="temperature-scale-numeric" type="string">1</PROPERTY>
<PROPERTY name="ui-refresh" type="uint16">30</PROPERTY>
<PROPERTY name="user-type" type="string">Standard</PROPERTY>
<PROPERTY name="user-type-numeric" type="string">2</PROPERTY>
<PROPERTY name="username" type="string">manage</PROPERTY>
</OBJECT>
...
temperature-
scale-numeric
string Numeric equivalents for temperature-scale values.
• 0: Fahrenheit
• 1: Celsius
ui-refresh uint16 User interface refresh rate. The default is 30 seconds.
user-type string The logged-in user's experience level.
• Novice
• Standard
• Advanced
• Diagnostic
user-type-
numeric
string Numeric equivalents for user-type values.
• 1: Novice
• 2: Standard
• 3: Advanced
• 4: Diagnostic
username string The logged-in user name.
Table 15 cli-parameters properties (continued)
Name Type Description