HP P2000

HP P2000 G3 MSA System CLI Reference Guide 323
job-running string Job running on the disk, if any.
• (blank): None.
• DRSC: The disk is being scrubbed.
• EXPD: The vdisk is being expanded.
• INIT: The vdisk is being initialized.
• RCON: The vdisk is being reconstructed.
• VRFY: The vdisk is being verified.
• VRSC: The vdisk is being scrubbed.
job-running-
numeric
string Numeric equivalents for job-running values.
• 0: None
• 2: INIT
• 3: RCON
• 4: VRFY
• 5: EXPD
• 6: VRSC
• 7: DRSC
blink uint32 • 0: The disk's locator LED is not illuminated.
• 1: The disk's locator LED is illuminated.
speed uint32 Not used.
lun uint32 Not used.
smart string • Disabled: SMART is disabled for this disk.
• Enabled: SMART is enabled for this disk.
smart-numeric string Numeric equivalents for smart values.
• 0: Disabled
• 1: Enabled
dual-port uint32 • 0: Single-ported disk.
• 1: Dual-ported disk.
error uint32 Not used.
fc-p1-channel uint32 Port 1 channel ID.
fc-p1-device-id uint32 Port 1 device ID.
fc-p1-node-wwn string Port 1 WWNN.
fc-p1-port-wwn string Port 1 WWPN.
fc-p1-unit-
number
uint32 Port 1 unit number.
fc-p2-channel uint32 Port 2 channel number.
fc-p2-device-id uint32 Port 2 device ID.
fc-p2-node-wwn string Port 2 WWNN.
fc-p2-port-wwn string Port 2 WWPN.
fc-p2-unit-
number
uint32 Port 2 unit number.
drive-down-code uint8 Numeric code indicating why the disk is down.
Table 23 drives properties (continued)
Name Type Description