HP P2000

HP P2000 G3 MSA System CLI Reference Guide 325
Example
# show disks
...
<OBJECT basetype="drives" name="drive" oid="1" format="rows">
<PROPERTY name="durable-id" type="string">disk_0.0</PROPERTY>
<PROPERTY name="enclosure-id" type="uint32">0</PROPERTY>
<PROPERTY name="slot" type="uint32">0</PROPERTY>
<PROPERTY name="location" key="true" type="string">0.0</PROPERTY>
<PROPERTY name="port" type="uint32">0</PROPERTY>
<PROPERTY name="scsi-id" type="uint32">0</PROPERTY>
<PROPERTY name="blocks" blocksize="512" type="uint64">286749488</PROPERTY>
<PROPERTY name="serial-number" type="string">SN</PROPERTY>
<PROPERTY name="vendor" type="string">SEAGATE</PROPERTY>
<PROPERTY name="model" type="string">ST9146802SS</PROPERTY>
<PROPERTY name="revision" type="string">0003</PROPERTY>
<PROPERTY name="state" type="string">VDISK</PROPERTY>
<PROPERTY name="secondary-channel" type="uint32">1</PROPERTY>
<PROPERTY name="container-index" type="uint32">0</PROPERTY>
<PROPERTY name="member-index" type="uint32">0</PROPERTY>
<PROPERTY name="type" type="string">SAS</PROPERTY>
<PROPERTY name="type-numeric" type="string">4</PROPERTY>
<PROPERTY name="job-running" type="string"></PROPERTY>
<PROPERTY name="job-running-numeric" type="string">0</PROPERTY>
<PROPERTY name="blink" type="uint32">0</PROPERTY>
<PROPERTY name="speed" type="uint32">0</PROPERTY>
<PROPERTY name="lun" type="uint32">0</PROPERTY>
<PROPERTY name="smart" type="string">Enabled</PROPERTY>
<PROPERTY name="smart-numeric" type="string">1</PROPERTY>
<PROPERTY name="dual-port" type="uint32">1</PROPERTY>
<PROPERTY name="error" type="uint32">0</PROPERTY>
<PROPERTY name="fc-p1-channel" type="uint32">0</PROPERTY>
<PROPERTY name="fc-p1-device-id" type="uint32">0</PROPERTY>
<PROPERTY name="fc-p1-node-wwn" type="string">5000c50006d73afb</PROPERTY>
health-numeric string Numeric equivalents for health values.
• 0: OK
• 1: Degraded
• 2: Fault
• 3: Unknown
• 4: N/A
health-reason string More information about the health value.
led-status string Disk LED status.
• Online: The disk is operating normally.
• Rebuild: The disk's vdisk is being reconstructed.
• Fault: The disk has a fault.
• Pred Fail: The disk has a predictive failure.
• ID: The locator LED is illuminated to identify the disk.
led-status-
numeric
string Numeric equivalents for led-status values.
• 1: Online
• 2: Rebuild
• 4: Fault
• 8: Pred Fail
• 16: ID
• 32: Remove
disk-dsd-count uint32 Number of times the DSD feature has spun down this disk.
Table 23 drives properties (continued)
Name Type Description