HP P2000 Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 391
Example
# show protocols
...
<OBJECT basetype="security-communications-protocols" name="services-security-protocols"
oid="1" format="pairs">
<PROPERTY name="wbi-http" type="string">Enabled</PROPERTY>
<PROPERTY name="wbi-http-numeric" type="string">1</PROPERTY>
<PROPERTY name="wbi-https" type="string">Enabled</PROPERTY>
<PROPERTY name="wbi-https-numeric" type="string">1</PROPERTY>
<PROPERTY name="cli-telnet" type="string">Enabled</PROPERTY>
<PROPERTY name="cli-telnet-numeric" type="string">1</PROPERTY>
<PROPERTY name="cli-ssh" type="string">Enabled</PROPERTY>
<PROPERTY name="cli-ssh-numeric" type="string">1</PROPERTY>
<PROPERTY name="smis" type="string">Disabled</PROPERTY>
<PROPERTY name="smis-numeric" type="string">0</PROPERTY>
<PROPERTY name="ftp" type="string">Enabled</PROPERTY>
<PROPERTY name="ftp-numeric" type="string">1</PROPERTY>
<PROPERTY name="snmp" type="string">Disabled</PROPERTY>
<PROPERTY name="snmp-numeric" type="string">0</PROPERTY>
<PROPERTY name="debug-interface" type="string">Enabled</PROPERTY>
<PROPERTY name="debug-interface-numeric" type="string">1</PROPERTY>
<PROPERTY name="inband-ses" type="string">Enabled</PROPERTY>
<PROPERTY name="inband-ses-numeric" type="string">1</PROPERTY>
</OBJECT>
...
inband-ses string • Disabled: The in-band SES interface is disabled.
• Enabled: The in-band SES interface is enabled. This is the default.
inband-ses-
numeric
string Numeric equivalents for inband-ses values.
• 0: Disabled
• 1: Enabled
Table 64 security-communications-protocols properties (continued)
Name Type Description

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure