60 Alphabetical list of commands
storage-size-precision #
Optional. Alias for precision.
storage-size-units auto|MB|GB|TB
Optional. Alias for units.
temperature-scale celsius|c|fahrenheit|f
Optional. Specifies to use the Celsius scale or Fahrenheit scale for temperature values. Default is
Celsius.
timeout #
Optional. Sets the timeout value in seconds for the login session. Valid values are 120–43200
seconds (2–720 minutes). The default is 1800 seconds (30 minutes).
type novice|standard|advanced|diagnostic
Optional. Specifies the user's level of technical expertise. The default is standard. All user types
have access to all commands.
units auto|MB|GB|TB
Optional. Sets the unit for display of storage-space sizes. auto lets the system determine the proper
unit for a size. Based on the precision setting, if the selected unit is too large to meaningfully
display a size, the system uses a smaller unit for that size. For example, if units is set to TB,
precision is set to 1, and base is set to 10, the size 0.11709 TB is instead shown as 117.1 GB. T h e
default is auto.
name
A name for the new user, which cannot already exist in the system. The name is case sensitive;
cannot include a comma, double quote, or backslash; and can have a maximum of 29 bytes. A
name that includes a space must be enclosed in double quotes.
NOTE: The user name admin is reserved for internal use.
Example Create user John who will view system information using base 2 in SMU:
# create user base 2 interfaces wbi level monitor John
Enter new password: ****
Re-enter new password: ****
Success: Command completed successfully. (John) - The new user was created.
See also • set user
• show users
To Next Page
Loading...
Need help?
General
