62 Alphabetical list of commands
name
A name for the new vdisk. The name is case sensitive; cannot include a comma, double quote, or
backslash; and can have a maximum of 20 bytes. A name that includes a space must be enclosed in
double quotes.
Example Create the RAID-1 vdisk VD1 using two disks in the first enclosure:
# create vdisk level raid1 disks 1.1,1.3 VD1
Success: Command completed successfully. (VD1) - The vdisk was created.
Create the RAID-50 vdisk VD2 having three RAID-5 sub-vdisks, each having three disks:
# create vdisk level r50 disks 1.1-3:1.4-6:1.7-9 VD2
Success: Command completed successfully. (VD2) - The vdisk was created.
Create the RAID-0 vdisk TempData using two single-ported disks:
# create vdisk level raid0 disks 1.1-2 TempData
Info: One or more disks are Single Ported - data path will not be fault tolerant.
Success: Command completed successfully. (TempData) - The vdisk was created.
See also • set vdisk
• show disks
• show vdisks
To Next Page
Loading...
