64 Alphabetical list of commands
snappable
Optional. Specifies to create a master volume instead of a standard volume.
prepare-replication-volume
Optional. Specifies to create a secondary volume instead of a regular master volume. This parameter
precludes use of the mapping, lun, and ports parameters because a secondary volume cannot
be mapped.
ovms-uid ID
For a volume to be accessed by an OpenVMS host, assign a volume ID in the range 1–32767 to
identify the volume to the host.
name
A name for the new volume. The name is case sensitive; cannot include a comma, double quote, or
backslash; and can have a maximum of 20 bytes. A name that includes a space must be enclosed in
double quotes.
Example Create the 20-GB volume V1 on vdisk VD1, and map it to ports A1 and B1 using LUN 5:
# create volume vdisk VD1 size 20GB ports a1,b1 lun 5 V1
Info: The volume(s) were created. (V1)
Success: Command completed successfully. (V1) - The volume(s) were mapped.
See also • set volume
• show vdisks
• show volumes
To Next Page
Loading...
