HP ProCurve 530 NA (J8986A)

5-33
General System Configuration
Configuring SNMP
• hpWlanClientRequestFailure – The station request failure is sent
when a station fails to associate / re-associate / authenticate with the
access point. The notification includes the station MAC address and
the reason code for the failure.
• hpWlanPossibleNeighborApDetected – This notification is sent
when any access point is detected.
• hpWlanVlanUntaggedUpdate – This notification is sent when the
VLAN Id is set to untagged.
• hpWlanMgmtVlanIdUpdate – This notification is sent if the
management VLAN ID is changed.
• hpWlanApDetectionUpdate – This notification is sent when AP
detection scan is set to Enable/Disable.
• hpWlanAdHocNetworkDetected– This notification is sent when
adHoc is detected with BSSID.
■ Authentication Traps: pertaining to local authentication.
• hpWlanLocalMacAuthClientSuccess – This notification is sent
when a station successfully authenticates the MAC address with the
database stored locally within the access point. The notification value
includes the MAC address of the authenticated station.
• hpWlanLocalMacAuthClientFailure – This notification is sent
when a station fails to authenticate the MAC address with the data-
base stored locally within the access point. The notification value
includes the MAC address of the authenticated station.
■ Radio Traps: pertaining to maintaining the access point radio.
• hpWlanRadioAntennaUpdate – This notification is sent when the
antenna configuration is changed.
■ DOT1X Authentication Traps: pertaining to Dot1X authentication.
• hpWlanRadiusServerFailover–This notification is sent when the
RADIUS server changes from Primary to Secondary and vice versa.
• hpWlanRemoteMacAddrAuthSuccess – This notification is sent
when a station successfully authenticates the MAC address with the
RADIUS server. The notification value includes the MAC address of
the authenticated station.
• hpWlanRemoteMacAddrAuthFailure –This notification is sent
when a station fails to authenticate the MAC address with the RADIUS
server. The notification value includes the MAC address of the station
that failed to authenticate.