HP ProCurve 530 NA (J8986A)

9-26
Command Line Reference
System Management Commands
show console
This command displays the status of the console.
Syntax
show console
Default Setting
N/A
Command Mode
Manager Exec
General Configuration Context
Example
show ssh
This command displays the current SSH configuration and the status of the
active SSH connections on this device.
Syntax
show ssh
Default Setting
N/A
Command Mode
Manager Exec
ProCurve Access Point 530(config)# show console
CLI Access:
Serial Interface Enabled
Telnet Interface Enabled
SSH Interface Enabled
CLI Confirmation Dialogs Enabled
Web Access:
HTTP Interface Enabled
SSL Interface Enabled
ProCurve Access Point 530(config)#