9-157
Command Line Reference
Wireless Distribution System (WDS)
Wireless Distribution System (WDS)
The WDS commands supported by the access point are listed below.
description (wds)
This command creates a human-readable string description of this WDS.
Syntax
description <string>
• string - Description of the WDS.
Default Setting
N/A
Command Mode
WDS Interface Configuration
Command Function Mode Page
description Establishes the WDS link description IC-WDS 9-158
disable Disables the WDS link. IC-WDS 9-158
enable Establishes the WDS link. IC-WDS 9-158
radio-used Sets the radio that will be used by this WDS link. IC-WDS 9-159
remote-mac Sets the mac address for the remote connection to the
access point.
IC-WDS 9-160
show wds Displays WDS link information. IC-WDS 9-160
wds-ssid <ssid> Establishes the SSID name for this WDS link. IC-WDS 9-159
wep-key Sets wds security key for the wireless connection. IC-WDS 9-161
wep-key-ascii Sets wds security to ascii format. IC-WDS 9-162
wep-key-length Sets wds security key length. IC-WDS 9-162
wpa-pre-shared-key Sets wds pre-shared key. IC-WDS 9-163
To Next Page
Loading...
