HP ProCurve 530 NA (J8986A)

9-103
Command Line Reference
Wireless Interface Commands
description
This command adds a description to the radio, ssid, or wds interfaces. Use the
no form to remove the description. The interface description is displayed when
using the show wlan 1 command from the Manager Exec level.
Syntax
description <string>
• string - Comment or a description for this interface.
(Range: 1-80 characters)
Default Setting
Radio: Radio 1 - WLAN 1
SSID: SSID 1
Command Mode
Radio Interface Configuration
WDS Radio Interface Configuration
WLAN Interface Configuration
Example
closed-system
This command closes access to stations without a pre-configured SSID. Use
the no form to disable this feature.
Syntax
closed-system
no closed-system
Default Setting
Disabled
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)# description RD-AP#
3
ProCurve Access Point 530(radio1-wlan1)#