HP ProCurve 530 NA (J8986A)

9-53
Command Line Reference
Flash/File Commands
N/A
Command Mode
Manager Exec
Example.
copy factory-default
This command resets configuration file to the factory-default configuration
on the device
.
Syntax
copy factory-default [ startup-config | custom-default ]
• startup-config - Reset the startup configuration file to contain the same
settings as the factory default configuration file.
• custom-default - Reset the default configuration file to contain the same
settings as the factory default configuration file.
Default Setting
N/A
Command Mode
Manager Exec
Example
copy running-config
This command saves the running-default to a configuration file on the device.
Syntax
copy running-default [ startup-config | custom-default ]
ProCurve Access Point 530# copy startup-config ftp
192.168.1.52 copystart user-name chris password open
ProCurve Access Point 530# copy startup-config tftp
192.168.1.52 copystart
ProCurve Access Point 530# copy factory-default startup-
config
ProCurve Access Point 530#