HP ProCurve 530 NA (J8986A)

9-25
Command Line Reference
System Management Commands
• ssl - Enable remote HTTPS (secure) access to the device. The no
version of the command disables remote HTTPS access.
Default Setting
Enabled
Command Mode
Global Configuration
Example
show buttons
This command displays the status of the push button capabilities.
Syntax
show buttons
Default Setting
N/A
Command Mode
Manager Exec
General Configuration Context
Example
This example displays the status of the push buttons on the access point.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# web-management ssl
ProCurve Access Point 530(config)#
ProCurve Access Point 530# show buttons
Custom Reset Enabled
Factory Reset Enabled
Password Reset Enabled
System Reset Enabled
ProCurve Access Point 530#