HP ProCurve 530 NA (J8986A)

7-74
Wireless Security Configuration
Web Authentication for Mobile Users
Follow the same procedure for the Welcome sub-tab and the Failed sub-tab,
if desired.
Note If any of the fields is not explicitly customized, then the default value of the
field is used.
To reset the text on the Web-Auth Login screen to its default values:
1. Select WLANs tab > WLAN (BSS/SSID) interface > [Edit]. A new pop-up
window opens.
2. Select the Web Authentication tab.
3. Click the Default Text box to check it, and to clear and disable the fields
below.
4. Click [Update].
CLI: Customizing the Login, Welcome, and Failed
Screens
CLI Commands Used in This Section
Command Syntax CLI Reference Page
[no] web-auth default-login-page 9-83
[no] web-auth custom-login-text [title <title-text>] | [header <header-
text>] | [footer <footer-text>] | [descriptive <descriptive-text>]
9-83
[no] web-auth default-welcome-page 9-83
[no] web-auth custom-welcome-text [title <title-text>] | [header
<header-text>] | [footer <footer-text>] | [descriptive <descriptive-
text>]
9-83
[no] web-auth default-failed-page 9-83
[no] web-auth custom-failed-text [title <title-text>] | [header <header-
text>] | [footer <footer-text>] | [descriptive <descriptive-text>]
9-83