HP ProCurve 530 NA (J8986A)

9-139
Command Line Reference
Neighbor AP Detection Commands
255
Command Mode
Radio Interface Configuration
Example
show detected-ap
This command displays the current AP detection configuration.
Syntax
show detected-ap
Default Setting
N/A
Command Mode
Manager Exec
Radio Interface Configuration
Example
ProCurve Access Point 530(radio1)# ap-detection max-entries
30
ProCurve Access Point 530(radio1)#
ProCurve Access Point 530(radio1)# show detected-ap
Neighboring AP detection status:
Radio 1 AP detection: Enabled (802.11g).
Radio 2 AP detection: Disabled
Neighboring APs:
BSSID SSID Sec Chan Type
------------------------------------------------------------
00:14:02:a0:4F:bc SSID1 none 3 AP
00:14:03:a2:4F:de SSID2 wpa 3 AP
ProCurve Access Point 530#