HP ProCurve 530 NA (J8986A)

6-41
Wireless Interface Configuration
Managing Multiple WLAN (BSS/SSID) Interfaces
CLI: Modifying WLAN (BSS/SSID) Interface Settings
CLI Commands Used in This Section
The following example shows how to modify WLAN interface settings.
Command Syntax CLI Reference Page
ssid <SSID> 9-102
description <description> 9-102
disable | enable 9-102
vlan <vid> 9-102
closed-system 9-102
show wlan <index > 9-102
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)# disable
ProCurve Access Point 530(radio1-wlan1)# description unsecure
ProCurve Access Point 530(radio1-wlan1)# vlan 9
ProCurve Access Point 530(radio1-wlan9)# closed-system
ProCurve Access Point 530(radio1-wlan9)