7-63
Wireless Security Configuration
Web Authentication for Mobile Users
Welcome Screen Default Values
Table 7-6. Welcome Screen Default Values
Failed Screen Default Values
Table 7-7. Failed Screen Default Values
Guidelines for Deploying Web-Auth
■ Roaming is not supported. Users must re-authenticate when connecting
through a different access point.
■ Static VLAN assignment per WLAN is supported.
■ All Web-Auth configuration parameters are shared across APs with Group
Config enabled.
■ RADIUS accounting (start and stop) is supported for authenticated users.
■ A connection established using Web-Auth remains active until the client
is disassociated from the access point, even if the original browser
window is closed.
■ Web-Auth settings are included in the Group Configuration Parameter
Block, and are shared when Group Configuration is enabled (see “Managing
Group Configuration” on page 5-63).
Registered User Only Guest User Only Registered & Guest User
Title Text Authentication Success Success Authentication Success
Header Text Authentication Success Success Authentication Success
Footer Text You now have access to the network You now have access to the network You now have access to the network
Descriptive Text Please wait while the network
connection refreshes itself
Please wait while the network
connection refreshes itself
Please wait while the network
connection refreshes itself
Registered User Only Guest User Only Registered & Guest User
Title Text Unable to authenticate Unable to authenticate Unable to authenticate
Header Text Authentication Failed Authentication Failed Authentication Failed
Footer Text Contact the network administrator if
you do not have an account
You do not have network access You do not have network access
Descriptive Text Either the username and password are
invalid or service is unavailable at this
time
To Next Page
Loading...
Need help?
General
