HP ProCurve 530 NA (J8986A)

9-35
Command Line Reference
System Clock Commands
Example
show sntp
This command displays the current time and configuration settings for the
SNTP client.
Syntax
show sntp
Default Setting
N/A
Command Mode
Manager Exec
Example
show time
This command displays the current date and time.
Syntax
show time
Default Setting
N/A
Command Mode
Manager Exec
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# sntp 10.1.0.19 time-zone
-480
ProCurve Access Point 530# show sntp
SNTP Status Enabled
SNTP Server 10.1.0.19
SNTP Time Zone -480
ProCurve Access Point 530#